skip to Main Content
Speak with a Training Specialist 1-800-826-1901 Interested in Seminar Training? Click Here Request Info Tech Support

Webinar: Seven Steps to Becoming an Expert Molder

This week kicks off our 2022 webinar series! We will begin by identifying the seven steps to becoming an expert molder. We’ll give an overview and explore each of the steps by explaining the science behind the plastic. Understanding the material science is the basis from which each crucial step is built. Then in webinars to follow, we’ll dive deeper, spending more time on each individual step. Join us for this important and informative webinar “Seven Steps to Becoming an Expert Molder”.

Our expert instructor, Todd Bryant, will use SimTech, our injection molding machine simulator, to run dozens of cycles demonstrating how machine control changes affect final part properties. 

You’ll get an inside look at process optimization from the “plastic’s point of view” as the foundation to all molding strategies. This means understanding the concept that all machine controls affect one or more of the four plastic processing variables. Paulson’s entire approach, from starting up a machine for a production run, to problem solving an existing run is to examine the situation from the “plastics point of view.”

Key Take Aways Include:

  • Learn the science behind the plastic material
  • Understand what makes an expert molder
  • Understand specific techniques to use to start-up a new mold
  • Get insider knowledge to lowering the cycle time once you’re making good parts
  • Learn how to use SimTech™ as a powerful learning tool so you can become a confident molder

Take part in this FREE webinar to learn and apply molding techniques that will dramatically change the way you process.

BONUS!

Special Guest: Donald C. Paulson

2021 Plastics Hall of Fame Inductee(read more here), Donald Paulson is the founder and chairman of Paulson Training Programs, Inc. and the creator of the now widely accepted method of teaching plastic processing from the “Plastics Point of View”. Don will join this webinar and give his personal account of his years of research with the General Motors Institute that lead to transforming injection molding from an art to a science. An experience you won’t want to miss.

Visit our webinar page to register for this webinar and upcoming topics. Also, gain access to previously recorded webinars. There’s a wealth of knowledge from Paulson all at your fingertips!

This Post Has 0 Comments

Leave a Reply

Your email address will not be published.

Search
I want to try it FREE