Paulson School of Molding Testimonials

More thoughts from people who have experience with the Paulson School of Molding
"The ProMolder 1 is most informative and beneficial training session I have ever experienced in Plastic Injection Molding. Highly recommended." Jim Silk — Atlantis Industries (PM1)		"I believe this training to be a good first step for all incoming injection machine operators." Mike Trauscht — Yoshino America (PM1)

"The course is a good balance of theory and practical learning. The instructor is very good, energized, and knows the subject." Mike Slemensky — Deb Dispensing (PM2)		"The Paulson School of Molding has enabled me to understand my job better. I feel I can benefit my employer more with the knowledge I gained at Paulson." Harold Jordan — PlastiPak (Onsite Training)

"Extremely beneficial course. Excellent, knowledgeable instructor that can teach processing from a plastics point of view. I would highly recommend this course." Greg Feagins — Denso Mfg.		"I have 19 years of injection molding experience and still gained a lot of knowledge after completing this course." Kevin Vandermark — Leggett & Platt

"If you have an opportunity to take this course, you should do it because the things you learn help you in your everyday job as a processor." Daniel Byerly, Tyco Electronics — March 2007		"Mr. Catignani has so much useful knowledge that can actually be applied. His experiences, I feel, could help management understand the real world on the floor." Paul Choplin, Tyco — March 2007

"With the knowledge I have gained from the ProMolder course, I am more fascinated with the whole injection molding process and want to learn as much as possible." Victor King — Subaru		"Excellent course. It teaches you to process from the plastic's point of view rather than the press." Tim Rhodes — IPEC

"Great learning tool for anyone involved with injection molding." Zach Muscato — Berry Plastics		"An absolute must for project managers in the plastic industry." Jamie McGrath — Berry

"This is a very useful and practical class taught by a very knowledgeable instructor." Michael McQuire — Draexlmaier		"A very powerful and useful course to anyone who is new to plastic molding." Jim Romine — IPEC

"I now feel more confident when I walk into my plant." Leslie Develle — Intralox		"This class can benefit molders from 20 days experience to 20 years experience." Joe Monte — Florida Custom Mold

"The knowledge obtained is excellent and can sharpen my skills and make me more valuable to the company." Dennis Capps — Leggett & Platt		"I am eager to use all the information I have just learned in this class so that I can improve production." Devon Senecal — Berry Plastics

"The instructor is enthusiastic and very knowledgeable. The samples, examples and hands on training will benefit any molder!" Kent Cooper — Subaru		"This course will take you to the next level of expertise!" Kevin Vandermark — Leggett & Platt

"This was the best injection molding training I have ever received." Sean Richards — Huntsman		"So you think you know plastics? Think again!" Victor King — Subaru

"ProMolder 1 really breaks down the fundamentals of injection molding." Bill Fleming — M-Tek		"Great. Very thorough." Jay Estes — ENCPTC

"Regardless of prior training or experience, you can and will learn something new and interesting from this course." Bill Allen, Jr., NAMPAC — May 2007		"I found the ProMolder 1 course very informative. It opened my mind and helped me visualize the entire injection molding process with a better perspective." Ian Edgar, Berry Plastics — May 2007

"Good introductory training for Injection Molding" Ram Misra — Pentair		"The Paulson School of Molding class was better than any other class I took" Ryan Kremis — IPEC

“Real world example for real world problems” Anonymous — March 2007		“It is good to know how and why plastics react the way they do in the molding process. It takes out a lot of guesswork when you have the knowledge.” Marty Sink, Tyco — March 2007

"This course definitely opens my eyes to different (better) ways to process. The basic foundation of this course is a must to start understanding everything else that goes into molding." Thomas Fowler, Berry Plastics — May 2007		"Everyone can benefit from this course, from material handlers and quality control to general managers and design engineers.” Christina Bigelow — Deb Dispensing (PM1)

"This is not a week away from work. It's a huge amount of valuable information, presented in ways that are easy to understand and retain. I can't remember ever studying so hard, or learning so much within a week.” John Howard — Stant Mfg (PM2)

» Back to the top