More thoughts from people who have experience with the Paulson School of Molding
|
"This course definitely opens my eyes to different (better) ways to process. The basic foundation of this course is a must to start understanding everything else that goes into molding."
Thomas Fowler, Berry Plastics — May 2007
|
"Regardless of prior training or experience, you can and will learn something new and interesting from this course."
Bill Allen, Jr., NAMPAC — May 2007
|
“It is good to know how and why plastics react the way they do in the molding process. It takes out a lot of guesswork when you have the knowledge.”
Marty Sink, Tyco — March 2007
|
"If you have an opportunity to take this course, you should do it because the things you learn help you in your everyday job as a processor."
Daniel Byerly, Tyco Electronics — March 2007
|
"Mr. Catignani has so much useful knowledge that can actually be applied. His experiences, I feel, could help management understand the real world on the floor.”
Paul Choplin, Tyco — March 2007
|
“Real world example for real world problems”
Anonymous — March 2007
|
"The Paulson School of Molding class was better than any other class I took"
Ryan Kremis, IPEC
|
"Good introductory training for Injection Molding"
Ram Misra - Pentair -
|
"Great. Very thorough."
Jay Estes -ENCPTC
|
"With the knowledge I have gained from the ProMolder course, I am more fascinated with the whole injection molding process and want to learn as much as possible."
Victor King, Subaru
|
"ProMolder 1 really breaks down the fundamentals of injection molding."
Bill Fleming - M-Tek
|
"Extremely beneficial course. Excellent, knowledgeable instructor that can teach processing from a plastics point of view. I would highly recommend this course."
Greg Feagins - Denso Mfg.
|
"So you think you know plastics? Think again!"
Victor King, Subaru
|
"This was the best injection molding training I have ever received."
Sean Richards - Huntsman
|
"This course will take you to the next level of expertise!"
Kevin Vandermark - Leggett & Platt
|
"The instructor is enthusiastic and very knowledgeable. The samples, examples and hands on training will benefit any molder!"
Kent Cooper, Subaru
|
"I am eager to use all the information I have just learned in this class so that I can improve production."
Devon Senecal - Berry Plastics
|
"The knowledge obtained is excellent and can sharpen my skills and make me more valuable to the company."
Dennis Capps - Leggett & Platt
|
"This class can benefit molders from 20 days experience to 20 years experience."
Joe Monte, Florida Custom Mold
|
"I now feel more confident when I walk into my plant."
Leslie Develle - Intralox
|
"A very powerful and useful course to anyone who is new to plastic molding."
Jim Romine - IPEC
|
"I have 19 years of injection molding experience and still gained a lot of knowledge after completing this course."
Kevin Vandermark - Leggett & Platt
|
"Excellent course. It teaches you to process from the plastic's point of view rather than the press."
Tim Rhodes - IPEC
|
"This is a very useful and practical class taught by a very knowledgeable instructor."
Michael McQuire - Draexlmaier
|
"An absolute must for project managers in the plastic industry."
Jamie McGrath - Berry
|
"Great learning tool for anyone involved with injection molding."
Zach Muscato - Berry Plastics
|
|
