Paulson Training Injection Molding Training Series — Basic Injection Molding with SkillBuilder

BASIC INJECTION MOLDING WITH SKILLBUILDER
5 Lessons :: 15 SkillBuilder Lab Lessons :: 22 Hours

With this training on the fundamentals of injection molding technology, your employees will have a solid understanding of the basics in injection molding and can apply that knowledge right away in the SkillBuilder lab lessons. Course content includes parts of the molding machine, mold types, nature of plastics and machine operation. Also available in Spanish and Mandarin Chinese..

Course Lessons

Lesson 1 :: Inside the Molding Machine
Lesson 2 :: Inside the Mold
Lesson 3 :: The Nature of Plastics
Lesson 4 :: Machine Operating Controls - Part 1
Lesson 5 :: Machine Operating Controls - Part 2

SkillBuilder Lab Lessons:

Lesson 1 :: Understanding the Injection Molding Process
Lesson 2 :: Setting Machine Controls
Lesson 3 :: Understanding Fill Rate Controls
Lesson 4 :: The Effects of Back Pressure
Lesson 5 :: Setting the Injection Limit Timer
Lesson 6 :: The Maximum Injection Pressure Settings
Lesson 7 :: Setting the Holding Timer
Lesson 8 :: Setting the Holding Pressure
Lesson 9 :: Mold Closed Time and Mold Open Time vs. Melt Temperature
Lesson 10 :: The Effects of Barrel Zone Temperatures on the Melt Temperature
Lesson 11 :: Some Effects of Mold Temperature
Lesson 12 :: The Effects of Screw RPM
Lesson 13 :: The Effect of the Screw Back Position
Lesson 14 :: Effects of Clamp Force
Lesson 15 :: Achieving and Controlling the Melt Temperature

<<< Click the graphic to download more information

DOWNLOAD INFORMATION
Size: 228K
Format: Acrobat PDF

Need Acrobat Reader? Click Here