8 Lessons — 10-12 Hours

This course:

• Demonstrates proven parts designing techniques
• Provides industry accepted plastic part design rules and details.
• Delivers important part design knowledge to improve part quality, eliminate mold revisions and reduce costs.

Developed in conjunction with Glenn Beall, a leading industry expert in part design, this fully-interactive course takes the designer through a coordinated step-by-step procedure that reduces the complex subject of plastic part design for injection molding to a simple, easy to understand technique.

Many injection molded parts suffer throughout their existence due to minor design defects. The use of this course and the guidelines explained will allow the designer to spot design defects in the drawing stage and save tens of thousands of dollars in molding problems and tooling revisions.

This course is recommended for: Part Design Personnel, Production Supervisors, Process Engineers, Quality Control Personnel, Molding Managers

Lesson 1 ::	Designing the Nominal Wall
Lesson 2 ::	Designing Three Dimensional Shapes
Lesson 3 ::	Designing Projections off the Nominal Wall
Lesson 4 ::	Designing Depressions in the Nominal Wall
Lesson 5 ::	Designing Hollow Bosses
Lesson 6 ::	Designing Molded Threads
Lesson 7 ::	Designing Parts with Undercuts
Lesson 8 ::	Summary

<<< Click the graphic to download more information

DOWNLOAD INFORMATION
Size: 2.1MB
Format: Acrobat PDF

Need Acrobat Reader? Click Here